SUPERMATIC GM-10 | TECHNICAL SUPPORT

REPLACE PUMP HOSE

1.       Loosen the spring at the bottom of the device.

2.       Loosen the tensioning strap.

3.       Retirez le tube de la pompe.

4.       Then unscrew the other turnbuckle.

4.1      Remove the pump hose.

5.       Grease the inside of the new pump hose.

6.       Then attach it back by means of the tension straps.

7.       Finally, reattach the spring to the bottom of the device.

REPLACE CABLE PUMP

1.        Loosen the spring at the bottom of the device.

2.       Remove the spring and loosen the cable clamp at the bottom.

3.       Remove the entire cable pump from the device.

4.1      Place the new cable pump at the top of the device.

4.2     Attach the end to the bottom of the device.

5.       Reattach the cable to the device.

6.       Reattach the cable pump at the bottom of the device.

REPLACE PISTOL CABLE

1.       Remove the pistol cable from the front of the device.

2.       Then remove the cable at the top of the device.

3.       Attach the new pistol cable to the front of the device.

4.       Finally, attach the cable to the top of the device.

REPLACE FILTER

1.       Unscrew the filter housing from the de
         (Provide a container to catch leftover paint)

2.       Replace the new filter or cleaned filter on the device.

REPLACE PISTOL COMPLETE

1.       Remove the pistol cable from the front of the device

2.1      Cut trough the paint tube

2.2     By means of the rotary knob at the front, remove the pistol.

3.       Attach the new pistol cobel

4.       Fix the paint hose on top of the pistol with a clamp.

5.       Finally, reattach the cable to the front of the device.